Search
Close this search box.

BC.CUR 510 causes the formation of a protective fiber on the concrete surface. The purpose of creating this layer is to prevent the evaporation of water inside the concrete, maintain humidity and complete the hydration process. The strength of concrete increases due to the use of this material due to having enough time to complete the hydration process.

Physical and chemical characteristics:

Physical state                     liquid

Color                                   Light gray

Density                                1.45 gr/cm³

Dissolve                              Ability  in water

PH                                        10-12

Properties and effects:

Maintaining the necessary moisture to carry out the hydration reaction

Reduction of surface cracks and shrinkage

Reducing the surface permeability of concrete

Protection of concrete surface from sunlight

No need to sprinkle water and keep concrete moist

No negative impact on the mold and concrete surface

Application:

On wide surfaces such as roads, airports, bridge decks and canals

Tropical and windy areas with intense sunlight

Applying concrete in conditions where it is difficult to keep it moist

Areas where it is not cost-effective to provide water for irrigation

Suitable for all structures

In accordance with the standards:

ASTM C309 – ASMT C171 – ASTM C156 – ACI308 – BS 7542 – AASHTOM 148

Consumption:

The consumption rate of BC.CUR 510 is determined according to atmospheric factors (sunlight radiation and wind speed). The optimal consumption rate is 150 to 200 grams per square meter.

consumption instruction:

BC.CUR 510 does not need to be mixed with other substances. Before use, shake the curing container well for homogenization. Run the cure operation immediately after opening the templates in just one step. In hot and dry or windy environments, where there is a high possibility of water evaporation and drying of the concrete surface, before applying the cure, you must completely irrigate the relevant surface with water, then perform the curing operation. To apply the cure, use a gun, brush or brush.

Maintenance:

It can be stored in the original packaging and in a covered warehouse away from direct sunlight at a temperature of 10-30 degrees Celsius for one year after the date of manufacture.

packing:

28 kg gallon

safety tips:

BC.CUR 510 is not flammable and is not harmful to the environment. Avoid contact with eyes and skin. The contact of this substance with the skin or its inhalation during execution causes skin inflammations, so it is recommended to use integrated work clothes, protective glasses, masks and gloves while working. In case of contact with eyes or skin, wash with plenty of fresh water. If swallowed, consult a doctor immediately.

Related Products

Reviews

There are no reviews yet.

Be the first to review “BC.CUR 510”

Your email address will not be published. Required fields are marked *