Search
Close this search box.

Top Cement 33

Floor covering resistant to wear and impact

Category:
Share:

Top Cement powder is suitable for creating smooth and polished concrete surfaces with high mechanical resistance in order to resist abrasion and impact. Cement flooring is a mixture of surfaces ready to harden, which is made with reinforced polymer cements. This flooring with very high adhesion strength to all kinds of surfaces and very high resistance is a suitable combination for structural flooring operations and enables the durability and hardening of surfaces.

Physical and chemical properties :

Physical state                               Powder

Color                                           gray

Density                                        1.8 gr/cm³

Final compressive strength          65  N/

Properties and effects:

It does not contain chlorine ions

Properties and effects:

Very high adhesion to all types of substructures

No shrinkage or cracking

With controlled contraction and no contraction

Resistant to static, dynamic and impact vibrations

Resistant to sunlight, rain and other environmental factors

Quick and easy implementation

Non-slip final surface

Application:

Restoration of old damaged floors

Flooring of factories, warehouses and cold houses

Increasing the resistance of concrete slabs against wear and impact

Subways, railway stations, airports and docks

Suitable for creating resistant floors for high-traffic halls

Consumption:

The consumption amount of Top Cement is determined based on the following conditions and the desired goal. The recommended dosage for each square meter with a thickness of 1 cm is about 25 kg.

consumption instruction:

Clean the desired area from any loose elements and dust. To prevent cracking, wet the surface completely with fresh water. Start mixing. First, pour the required water into the mixer and while the mixer is on, slowly add the calculated amount of Top Cement powder to the water. Continue the mixing process until a homogeneous mortar is formed and the proper rheology is reached. In order to achieve better results, pour the prepared mortar in the shortest possible time at the place of execution and trowel or trowel it. After initial setting, keep the applied surface wet with water spray for 2 days. Then, to create expansion seams, cut the desired areas with a cutter. And if needed, you can sand the execution area to create a polished and beautiful surface.

Maintenance:

It can be stored in the original packaging and in a covered warehouse away from direct sunlight at a temperature of 10-30 degrees Celsius for one year after the date of manufacture.

packing:

25 kg bag

safety tips:

This material is not flammable and is not harmful to the environment. Avoid contact with eyes and skin. In case of contact with eyes, wash with plenty of fresh water. It is recommended to use protective glasses and gloves while working. If swallowed, consult a doctor immediately.

Related Products

Reviews

There are no reviews yet.

Be the first to review “Top Cement 33”

Your email address will not be published. Required fields are marked *