SEAL PWB 1400 – Water Base Bituminous Primer
Resistant and flexible waterproofing, without the need for heating.
PWP 1400 is a thick emulsion primer based on water and bitumen and other additives that can be used pure or diluted with water. This product is implemented with the aim of preventing the penetration of destructive ions and sulfates in the soil on the concrete surface before being buried in the soil. After consumption, its water evaporates and creates a resistant and flexible layer that does not dissolve in water. PWP 1400 is a type of waterproofing that does not require heating.
Physical and chemical properties :
Physical state Thick liquid
Color Black
Density 0.91 gr/cm³
Initial drying time 2 hours
Final drying time 24 hours
Properties and effects:
Final drying time 24 hours
unflamable
Dilute capability
becoming with water
Ease of implementation and high coverage
High adhesion to metal and concrete surfaces
Single component with complete waterproofing properties
Creating a flexible layer after drying
High resistance to salts and destructive ions
Ability to dissolve in water before drying
Insoluble in water after drying and creating an elastic flexible resistant layer
Application:
Insulation of walls, tunnels, bridge foundations, retaining walls, basements and water tanks
Insulation of concrete pipes and structures near the sea and in the water
Insulation of foundations and surfaces that are in contact with soil or destructive concrete solutions
In accordance with the standards:
ASTM D1640 – ASTM D4060 – ASTM D2939 – ASTM D1227
Consumption:
The consumption of PWP 1400 is determined according to the workshop conditions and porosity on the surface. The recommended dosage is about 700 grams to 1,200 grams of this product for each square meter.
consumption instruction:
First, the desired surface should be cleaned from any kind of pollution, dust and grease. The intended place should be smooth, firm and resistant. If there is damage in some parts, they should be repaired and cleaned. First, dilute PWP 1400 with an equal amount of water and apply the first layer on the surface. After the first layer dries, apply PWP 1400 product alone as the main coating without diluting with water.
Maintenance:
It can be stored in the original packaging and in a covered warehouse away from direct sunlight at a temperature of 10-30 degrees Celsius for one year after the date of manufacture.
packing:
20 liter bucket
safety tips:
This material is not flammable and is not harmful to the environment. Avoid contact with eyes and skin. In case of contact with eyes, wash with plenty of fresh water. It is recommended to use protective glasses and gloves while working. If swallowed, consult a doctor immediately.
Reviews
There are no reviews yet.