Concrete restorer RP N500

Concrete Repair RP N500 is a Cement-based, repair of damaged concrete surfaces with high adhesion

Description :

RP N500 normal powder Repairis made on the basis of Portland cement and with proper granulation. This product is used to repair damaged surfaces, fill small pores and increase compressive and bending resistance. Proper adhesion and non-shrinking to the lower surfaces are other features of this material.

Physical and chemical properties:

physical state:                   powdery

Color:                                  Gray

Density:                              1.9 g/cm³

Chloride Content :           No (BS 5075)

Properties and effects:

Same color as concrete

Removing all surface damage and cracks

Increased wear resistance

Very high adhesion to all kinds of materials

No shrinkage and cracking

Resistant to freezing and thawing cycles

Easy to use and create a usable paste

Application :

Filling holes and irregularities

Smoothing damaged surfaces

Repairing and repairing worm-eaten, broken and worn surfaces

In accordance with the standards:

ASTM C1236 – ASTM C1583 – EN 12637 – EN 1542

Consumption :

The consumption of RP N500 depends on the condition of the work surface. Usually, 1.5 to 2.5 kg of this product is needed for each square meter with a thickness of 1 mm.

Method of Use:

The work surface must be solid, clean and free of any kind of pollution, dust, grease and paint. Moisten the work surface before use. First, pour the necessary water (5 to 6 liters of water for each 25 kg bag of RP N500) into the mixer and while the machine is on, slowly add the required RP N500 powder to the water and mix until it reaches Continue a homogeneous mortar with proper rheology. Then apply the prepared mortar with a trowel or trowel. The performance should be done in less than 20 minutes. For processing operations, keep the applied area moist for 24 hours after semi-drying.

Maintenance :

It can be stored in the original packaging and in a covered warehouse away from direct sunlight at a temperature of 5-30 °C for one year after the date of manufacture.

Package type  :

25 kg bag

safety tips :

This material is not flammable and is not harmful to the environment. Avoid contact with eyes and skin. In case of eye contact, wash with plenty of water. It is recommended to use protective glasses and gloves while working.