Search
Close this search box.

Ceramic Tiles Adhesive BC-AP60

To install all types of ceramic tiles on the floor.

Category:
Share:

BC-AP60 ceramic tile adhesive is a micronized powder, based on cement with polymer additives, and will speed up the process of gluing tiles. This work was previously done by cement grouts, which is a costly and time-consuming process. Tile adhesive has good flexibility. and has a very high efficiency for installing all kinds of tiles on the floor, such as the floor of halls and tiles on tiles.

Physical and chemical properties

Physical state                             Powder

Color                                         gray

Density                                     1.65 gr/cm³

Usability time                           30-45 minutes

Properties and effects:

No cracking due to contraction and expansion

Ease and speed of implementation

The possibility of moving tiles and ceramics up to a few minutes after installation

Application:

Installation of tiles on all types of cement, concrete and tile surfaces

To install all kinds of ceramic tiles in the stairs

In accordance with the standards:

ISIRI 12492 – ASTM C494 Type F – BS EN 12004 – EN 934-2

Consumption:

The consumption amount of BC-AP60 according to the surface of the substrate, the type of tile, as well as laboratory and workshop tests, about 2 to 3 kg of adhesive is needed to cover one square meter. For each kilogram of powder, 280 grams, in other words, for each bag. 7 liters of water is required for 25 kilos.

consumption instruction:

Before using BC-AP60 , the surface must be clean, free of loose particles and dust. First, slowly add the powder to the required amount of water and mix with an electric mixer. After obtaining a homogenous paste with proper rheology, spread the required amount of adhesive on the surface with a toothed spatula and immediately After that, install the tile by applying pressure on it.

Maintenance:

It can be stored in the original packaging and in a covered warehouse away from direct sunlight at a temperature of 10-30 degrees Celsius for one year after the date of manufacture.

packing:

25 kg bag

safety tips:

This material is not flammable and is not harmful to the environment. Avoid contact with eyes and skin. In case of contact with eyes, wash with plenty of fresh water. It is recommended to use protective glasses and gloves while working. If swallowed, consult a doctor immediately.

Related Products

Reviews

There are no reviews yet.

Be the first to review “Ceramic Tiles Adhesive BC-AP60”

Your email address will not be published. Required fields are marked *