Warm Run Mastic

Warm Mastic is a kind of elastometer based on bitumen rubber and is used to fill and seal expansion joints. This mastic must be heated until it is fluid and fluid and used in horizontal seams.

Physical and chemical characteristics:

Physical state                     Thick emulsion

Color                                   Black

Density                                1.21 gr/cm³

Flammablity                       flammable

Properties and effects:

It does not contain chlorine ions

Length increase percentage 700%

Operating temperature +5 degrees Celsius

Very good adhesion to most materials

Resistant to rotting in hot weather

Maintaining strength and not breaking brittle

Resistant to high water pressure

Resistant and stable against oils and petroleum substances

Resistant to sea water, rain and different weather conditions

Flexible and resistant equal to the lifespan of the structure

Application:

Sealing all types of seams in water sources structures such as pools, water treatment plants and water tanks

As a flexible sealant in expansion and implementation joints

Concrete roads, floors of multi-storey parking lots, floors of airports

Sealant for asphalt surfaces and industrial factories

In accordance with the standards:

ASTM D1854 – ASTM D6690 – ASTM D1190 ASTM D5329 –

Consumption:

According to the depth and number of seams and the specific weight of the mastic, the consumption amount of MASTIC W is determined.

consumption instruction:

First, the intended seams should be cleaned from any kind of contamination, dust, grease and weak elements using a metal brush and high pressure wind. If parts are damaged, they should be repaired using a restorer. The work surface must be completely dry and solid. Heat the special container of mastic in indirect heat at 150 degrees and stir during melting to avoid uneven heating. The maximum melting temperature is 170 degrees Celsius and the allowed value should not exceed this limit. After reaching the appropriate mental state and fluidity, it can be implemented by injection methods or workshop ladle. The implementation of this product should be in dry weather conditions.

Maintenance:

It can be stored in the original packaging and in a covered warehouse away from direct sunlight and away from direct heat at a temperature of +10 to +30 degrees Celsius for two years after the date of manufacture.

packing:

20 kg buckets

safety tips:

This substance is flammable. Smoking, welding and lighting a flame in the work environment is strictly prohibited. Avoid contact with eyes and skin. It is recommended to use gloves and safety glasses. In case of skin contact, wipe it with petroleum solvent and then wash with soap and water.