Search
Close this search box.

Adhesive Latex 90

A high-strength emulsion for bonding fresh concrete to old and making impermeable mortar

Category:
Share:

Latex 90 is a thick and homogenous polymer emulsion that is used to increase the adhesion of mortar or to stick a new layer of concrete on the old layer, to repair the previous layer and to seal the structures. As a result of the reaction with water and cement, this substance, in addition to creating adhesive properties, creates cohesion and cohesion in the texture of concrete. Linx90 dissolves after mixing with water, but becomes insoluble and impermeable after drying.

Physical and chemical properties

Physical state                    Thick emulsion

Color                                   white

Density                                1.02 gr/cm³

Chloride Content             No (BS 5075)

Properties and effects:

Increasing the strength of adhesion and continuity between new and old concrete

Increasing the adhesion and cohesion of mortar components

Increasing the wear rate of concrete

Increased resistance to cracking

Increasing the strength of concrete in frost cycles

Application :

Repair of Kermo concretes and surface damage of concrete structures

Bonding of repair mortar components

The possibility of implementing thin layers of concrete

Connecting new concrete with old concrete

Making waterproof mortar

In accordance with the standards:

ASTM C1042 – ASTM C1059 – ASTM C 1440

Consumption :

Latex90additive is used in the amount of 5 to 10% of cement weight.To adhesive two layers of concrete, one unit of adhesive is mixed with one unit of water.The exact amount of adhesive depends on the granulation, the level of penetration of the surface and the water used. The best estimate is the workshop tests.

Method of Use :

Before using Latex 90, the damaged concrete surface should be cleaned from any loose elements, dust and grease, and then completely watered with fresh water. There are two ways to use this product.

1- As concrete adhesive slurry: First, mix the calculated amount of adhesive (20%) with water (20%) and cement (60%) and make a homogeneous slurry. Then spread 1 to 2 mm thick grout on the surface.

2- As a repair mortar: mix 10 to 40% with dry ingredients instead of water and make a homogeneous mortar. Water the surface of the old concrete with fresh water and then (without running water on the surface of the old concrete) apply the prepared mortar on the surface of the concrete.

Maintenance  :

It can be stored in the original packaging and in a covered warehouse away from direct sunlight at a temperature of 10-40 °C for one year after the date of manufacture.

Package type :

Packages of 4, 10 and 20 kg

safety tips :

This material is not flammable and is not harmful to the environment. Avoid contact with eyes and skin. In case of eye contact, wash with plenty of water. It is recommended to use protective glasses and gloves while working

Related Products

Reviews

There are no reviews yet.

Be the first to review “Adhesive Latex 90”

Your email address will not be published. Required fields are marked *