Search
Close this search box.

Two-component waterproof cover-COAT CA400

Based on cement and acrylic resin, water permeability barrier with high flexibility and adhesion

Category:
Share:

COAT CA400 is a two-component protective product based on acrylic cement, which is used as a barrier against water penetration. This product is attached to all types of concrete and metal surfaces and is used as a suitable coating to protect drinking water tanks and pipes, prevent water evaporation and protect underground concrete structures.

Physical and chemical characteristics(Component A&B):

Physical state  A,B                          liquid,Powder

Color A,B                                           white,gray

Density (A+B)                                   1.75 gr/cm³

drying time                                    2 hours

Operation time                         after7 days

Properties and effects:

non-toxic

Breathability of concrete

Anti-algae and moss

Produced in different colors

Frost resistance

Resistant to sunlight

Applicable on all types of horizontal and vertical surfaces

Ease of implementation (even on 3-day concrete)

Strong adhesion to all types of surfaces and materials

Sealing all concrete, metal and cemented surfaces

Creating an elastic and water-resistant layer after drying

Very good resistance to all kinds of chemicals and corrosive substances such as salts

Application:

Sealing liquid tanks, water channels and water and sewage treatment plant

To be used to insulate walls and ceilings

To seal tunnels, reservoirs and pools

Floor sealing of toilets and fountains

In accordance with the standards:

ASTM F 5963 – ASTM D624 – ASTM D412 – ASTM D 1149 – ASTM C836

Consumption:

Based on the work surface conditions and porosity characteristics, the consumption amount of COAT CA400 is different. But for a better result, 1.8 to 2 kg of COAT CA400 product is needed to cover one square meter of surface.

Method of Use :

First, all the seams between the wall and the floor, as well as the wall to the wall, the concrete muscle, and the parts with high damage should be repaired using repair mortar. After drying the repair and muscle building, the surface under the work must be clean and free from any kind of pollution such as dust, grease, paint and previous coatings. Before using COAT CA400 , completely wet the work surface with fresh water.

While the electric mixer is on, slowly add the powder to the liquid and continue mixing until you get a homogeneous slurry. Using a big brush, apply a layer of coating (up to 1 mm) on the surface and wait until the layer is half dry. Then we run the next layer. After drying, in order to achieve the correct result, the working surface should be kept wet by spray for 24 hours.

Maintenance :

It can be stored in the original packaging and in a covered warehouse away from direct sunlight at a temperature of 5-30 °C for one year.

Package type:

A component 10 kg

B component 20 kg

safety tips:

This material is not flammable and is not harmful to the environment. Avoid contact with eyes and skin. In case of eye contact, wash with plenty of water. It is recommended to use protective glasses and gloves while working.

 

Related Products

Reviews

There are no reviews yet.

Be the first to review “Two-component waterproof cover-COAT CA400”

Your email address will not be published. Required fields are marked *