HYDROPHILIC WATERSTOP

These types of waterstops are based on synthetic rubbers and are used to fix the leakage of executive joints and the cut sections of concreting and prevent water penetration in the executive joints. It has a very high swelling ability and acts in a controlled manner in contact with water. This type of water stop maintains its appearance in the conditions of wet process and multiple drying.

Physical and chemical characteristics:

Physical state                                   Rubber

Color                                                  Blue/red

Density                                               1.22 gr/cm³

Initial expansion                              After contact with water At least after 6 hours

Expansion capability                       400% – 500%

Length increase                               400%

Hardness                                           Shor A 35

Temperature efficiency                 +20 to +75

Properties and effects:

• Quick and easy installation
• Resistant to high water pressure
• Ability to install with adhesive and nails
• Permanent and flawless performance
• Resistant to moisture and permanent drying
• No need for overlap or welding during installation
• Non-toxic and suitable for drinking water tanks

Application:

Pools, dams, concrete liquid tanks, canals

Sealing the executive seams of concrete buildings and water structures such as walls and floors

Standard:

This product is made according to DIN1048-5 standard for water pressure up to 6 bar.

consumption instruction:

Before applying the work, the surface below must be dry, clean and free from any pollution and dust, loose parts, grease, etc. For the adhesion of hydrophilic waterstop to concrete, use special adhesive for hydrophilic waterstop to connect concrete and waterproofing tape. to be For more certainty, a steel nail can be used to fix this type of waterstop. It is recommended to use a wire fastener around the hydrophilic in cases where it is used around the pipes and similar items, along with the use of adhesive.

Maintenance:

It can be stored in the original packaging and in a covered warehouse away from direct sunlight at a temperature of 10-30 degrees Celsius for one year after the manufacturing date.

packing:

Packing 5 rolls of 15 meters

safety tips:

This material is not flammable and is not harmful to the environment. Avoid contact with eyes and skin. In case of contact with eyes, wash with plenty of fresh water. It is recommended to use protective glasses and gloves while working. If swallowed, consult a doctor immediately.